ADTRAN 1200182L1, User Manual

Page: 39 / 50

AT COMMAND LIST Appendix B. AT Commands
Modem and Port Control
61200182L1-1 Async-232 Module User Manual B-3
Modem and Port Control
Profile Configuration Control and Command Help
Command values with menu equivalents will not be changed based on AT com-
mand changes unless the profile is stored for the port (&W).
Dial Commands
Dial commands, their functions, and examples are given in Table B-1.
ATDT and ATDP prefixes result in the same dialing behavior as ATD.
ATS Access S-register
ATA Answer if autoanswer mode not enabled (see S0 register description)
AT Attention
ATH Hangup in command escape mode
A/ Repeat last command
ATZ Reset. Hang up call if active and reset profile to current NVRAM settings.
ATO Return online after command escape
&V2 Display AT command list help
&V Display this port's active and stored profiles
&F Restore factory default profile for port (does not save settings to NVRAM)
&W Save current profile for this port to NVRAM
Table B-1. Dial Commands
Command Function Example
ATDdialnum Dial out. Precedes the dial string. Protocol
and call type set in configuration menus. ATDT5551212
ATDdialnum#P Dial out using specified protocol which over-
rides configuration menu settings.
P=1 selects Analog Mode, P=2 selects ISDN
PPP.
ATDT5551212#1
ATDdial
string#P#C Dial out using specified protocol and ISDN
digital call type.
P=2 as above selects ISDN PPP
C=1 selects Data 64K
C=2 selects Data 56K
C=3 selects Audio 3.1KHz
C=4 selects Speech
ATDT5551212#2#3