NCT-04/03/02 Punch CNC System (Commissioning Manual)
3)
Mold pin output clamping effective level: P1.090;
4)
Mold pin insertion detection effective level: P1.086;
5)
Mold pin unplug detect effective level: P1.087;
2.5.3
T-axis Home Debugging
1)
Install the home detection switch;
2)
Set T-axis offset; related parameter: P1.039 T-axis zero point offset;
3)
Set T-axis direction clearance compensation; related parameter: P1.030;
4)
Set T-axis home speed: related parameter: P1.050;
5)
Set T-axis home acceleration: related parameter: P2.069;
2.5.4
Turret Trial Run
1)
Press the
button to switch the work mode to "Retool";
2)
Press T+/T- to move the turret for a station;
3)
In MDI, enter the code to test retooling
0
Note:
1)
The system integrates turret retooling debugging function; P1.1 10 Turret retooling debugging enabled;
1: When the turret is in position, the mold pin is not inserted; it can be inserted manually;
0: When the turret is in position, the mold pin is automatically inserted;
2)
P2.099 servo T-axis enable control is 1; the retooling process is
2.5.5
Retooling Speed Adjustment
T-axis parameters
Speed: P1.011 T-axis rapid traverse rate;
Initial speed: P1.015 T axis starting rate;
Acceleration: P1.019 T-axis acceleration;