Electrical Device Compliance Notices
Safety Warnings and Cautions
For your safety and the proper operation of the device:
●
This unit must be installed and serviced by suitably qualified personnel only.
●
Do not break the warranty seals on the device or open the lid. Only approved service
technicians are permitted to service this equipment.
●
Disconnect all power before servicing the unit.
●
Do not expose this device to rain or other moisture. Clean only with a dry cloth.
●
If not installed in an equipment rack, install the product securely on a stable surface.
●
Install the product in a protected location where no one can step or trip over the
supply cord, and where the supply cord will not be damaged.
●
If a system is installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than the room ambient
temperature.
●
Consideration should be given to installing the unit in an environment compatible
with the maximum recommended ambient temperature of 50 degrees Celsius (122
degrees Fahrenheit).
●
Install the unit in a rack so that the amount of airflow required for safe operation is
not compromised.
○
The recommended clearance on the top and sides of the unit is at least ½ “
(one half inch/one centimeter).
●
Mounting of the unit in a rack should be such that no hazardous condition is achieved
due to uneven mechanical loading.
●
Use only a grounded electrical outlet when connecting the unit to a power source.
●
Reliable earth grounding of rack-mount equipment should be maintained.
○
Particular attention should be given to supply connection other than direct
connections to the branch circuit (e.g., use of power strips).
