ADT TSSC-BASE User Manual Download Page 8

 

 

 

LIMITED WARRANTY 

Terms and Conditions Applying to Sale of Equipment

 

1.  Limited Warranty. 
Any part of the system, including the wiring, installed under this Agreement which proves to be defective in material or workmanship within 90 

days of the date of completion of installation will be repaired or replaced at ADT's option with a new functionally operative part. Labor and 

material required to repair or replace such defective components or to make mechanical adjustments to the system will be free of charge for a 

period of 90 days following the completion of the original installation. 
This warranty is extended only to the original consumer purchaser of the system and may be enforced only by such person.

 

To obtain service under this warranty, call or write our local ADT Service Department at the telephone number or address found in your local 

yellow pages. 
Service pursuant to the warranty will be furnished only during ADT's normal working hours 8:00A.M. to 4:30P.M., Monday through Friday, 

except holidays. Services rendered outside the normal working hours of ADT are not within the scope of this warranty and any services 

requested to be performed at such times shall be charged for at ADT's then applicable rates for labor and material. 
This warranty does not apply to the conditions listed below, and in the event customer calls ADT for service under the warranty and upon 

inspection it is found that one of these conditions has led to the inoperability or apparent inoperability of the system, a charge will be made for 

the service call of the ADT representative, whether or not he actually works on the system. Should it actually be necessary to make repairs to 

the system due to one of the "conditions Not Covered By Warranty", a charge will be made for such work at ADT's then applicable rates for 

labor and material.

 

 
Conditions Not Covered By Warranty. 

Damage from accidents, acts of God, alterations, misuse, tampering or abuse.  

B. 

Failure of the customer to properly close or secure a door, 

window, or other point protected by a burglar alarm device.

  C.

 Failure of customer to properly follow operating instructions provided by ADT at 

time of installation or at a later date.  

D.

 Trouble in leased telephone.  

E.

 Trouble due to interruption of commercial power.

  F. 

Battery 

replacements. 
This warranty is in lieu of all other express warranties. Any implied warranties of merchantability and fitness for a particular purpose are limited 

in duration to a period of 90 days from the date of completion of installation. The exclusive remedy of the customer hereunder shall be repair 

or replacement as stated above. Under no circumstances shall ADT be liable to the customer or any other person for incidental or 

consequential damages of any nature, including without limitation, damages for personal injury or damages to property, and, however 

occasioned, whether alleged as resulting from breach of warranty by ADT, the negligence of ADT, or otherwise, ADT's liability will in no event 

exceed the purchase price of the system. Some states may not allow limitations on how long an implied warranty lasts, or the exclusion or 

limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you, unless a longer period is 

required by applicable law. Any action against ADT in connection with a system must be commenced within one year after the cause of action 

has occurred. 
No agent, employee or representative of ADT or any other person is authorized to modify this warranty in any respect. 
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 
2.  Installation. 
ADT agrees to install the equipment in a workmanlike manner in accordance with the following conditions: 
Customer will make premises available without interruption during ADT normal working hours 8:00A.M. to 4:30P.M., Monday through Friday, 

except Holidays.  

B.

 Customer understands that the installation will necessitate drilling into various parts of the premises: ADT intends, 

generally, to conceal wiring in the finished areas of the premises; however, there may be areas which, due to construction, decoration, or 

furnishing of the premises, ADT determines, in its sole discretion, that it would be impractical to conceal wiring and, in such cases, wiring will 

be exposed.  

C.

 Customer agrees to provide 110 VAC electrical outlets at designated locations for equipment requiring AC power.  

D.

 

Customer to provide for lifting and replacing carpeting, if required, for installation of floor mats or wiring. 

ALL RIGHTS RESERVED 

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means – electronic, 

mechanical, photocopying, recording, or otherwise without the written permission of ADT Security Services. The material in this publication is 

for information purposes and subject to change without notice. ADT Security Services assumes no responsibility for any errors which may 

appear in this publication. 
 
 
 

 

ADT Security Services 

1501 Yamato Rd 

Boca Raton, FL 33431 

Copyright © 2013 

Ê800-13959ÈŠ 

800-13959  11/13  Rev. D 

 

Summary of Contents for TSSC-BASE









Reviews: