– 3 –
KEYS
Access the Base control keys by lifting up the door
.
Access the Keypad keys by opening the swing-down
door
.
The Base and Keypad keys are continuously backlit for ease of use.
KEY
DESCRIPTION
OFF
Disarms the burglary portion of the system, silences alarms and audible trouble
indicators, and clears visual alarm trouble after the problem has been corrected.
AWAY
Completely arms both perimeter and interior burglary protection by sensing an intruder's
movements through protected interior areas as well as guarding protected doors,
windows, etc. Late arrivals can enter through an entry delay zone (entrance door) without
causing an alarm if the system is disarmed before the entry delay time expires.
STAY
Arms the perimeter burglary protection, guarding protected doors, windows and other
perimeter protection points, and sounds an alarm if one is opened. STAY automatically
bypasses certain areas which permits movement within your house without causing an
alarm. Late arrivals can enter through an entry delay zone (entrance door) without
causing an alarm if the system is disarmed before the entry delay time expires.
NIGHT
STAY
Arms similar to STAY mode, but also arms additional pre-selected sensors for increased
protection while staying inside. Late arrivals can enter through an entry delay zone
(entrance door) without causing an alarm if the system is disarmed before the entry delay
time expires, and they do not violate any of the pre-selected sensor areas. An alarm
occurs immediately if anyone enters those areas while armed.
MAX
Arms in manner similar to AWAY mode, but eliminates the entry delay period, thus
providing maximum protection. An alarm occurs immediately upon opening any protection
point, including entry delay zones (entrance doors). (“Arm Instant,” if programmed.)
TEST
(Keypad only) - Tests the system and alarm sounder if disarmed.
BYPASS
(Keypad only) - Removes individual protection zones from being monitored by the system.
Displays previously bypassed protection zones.
INSTANT
Arms in manner similar to STAY mode, but eliminates the entry delay period, offering
greater security while inside and not expecting any late arrivals. An alarm will occur
immediately upon opening any perimeter protection point, including entry delay zones.
(“Arm Instant,” if programmed.)
CODE
(Keypad only) - Allows assigning user codes that can be given to other users of the system.
CHIME
(Keypad only) - Turns on and off the CHIME mode. When on, any entry through a
protected delay or perimeter zone while the system is disarmed will cause a tone to sound
at the Keypad(s).
IMPORTANT CHIME WARNING NOTE:
The Chime feature is intended for
convenience and is not intended for life safety purposes or pool alarm and does not meet
the requirements of UL 2017.
READY
(Keypad only) – Pressing the READY key at the Keypad prior to arming displays all open
protection zones within the Keypad's home partition. This key is also used to display all
zone descriptors that have been programmed, by holding the key down at least 5 seconds.
[#]
(Keypad only) - Permits ARMING of the system without using a security code ("Quick
Arm", if programmed).
Keys 0-9
Used to enter your individual security access code(s).
Special
function
keys
Panic alarm activation (Keypad only). The panic alarms are activated by pressing a
Special Function Key (see below). Panic key functionality and the type of panic alarms
produced is determined by the control panel’s capability and programming.
(Check with
your installer for the availability and assignment of these panic keys.)
SPECIAL FUNCTION KEYS (KEYPAD ONLY)
The A, B, and C keys located to the left of the
numeric keys can be programmed as Panic Alarm
Activation keys.
(Check with your installer for the
availability and assignment of these panic keys.)
Key
Function
A
B
C