User’s Manual
18
CAUTION: Do NOT disconnect the USB cable or the power from the device while
copying video clips. If the USB cable is disconnected while copying video clips,
archived data might be lost.
Highlight the
Status
tab, and the Storage
Status
setup screen displays.
The
Temperature
column displays the temperature of the storage device.
y
Good
–
The temperature does not exceed the user-defined temperature threshold.
y
Bad
–
The temperature exceeds the user-defined temperature threshold.
y
N/A –
The DVR cannot read the temperature.
The
S.M.A.R.T.
column displays
“Good”
,
“Bad”
or
“N/A”
, depending on storage conditions.
y
Good
–
The storage condition is normal.
y
Bad
–
Data cannot be written on or read from the storage device.
y
N/A –
Storage conditions are normal, however, the S.M.A.R.T. monitoring is not working or supported.
NOTE: When the S.M.A.R.T. displays
Bad
, the screen displays a message box. Once the
“Bad” message displays, replacing the hard disk drive is recommended, usually within 24
hours.
NOTE:
Temperature
and
S.M.A.R.T.
information will be available only for internal hard
disk drives supporting the SMART (Self-Monitoring Analysis and Reporting Technology)
monitoring program.
User
Highlight
User
in the System menu and press the
button. The
User
setup screen displays the
authorized groups and users. You can add and delete groups and users. When adding a group,
you can assign authority levels to the group.
Figure 13 Storage Status setup screen.
The
Type
column displays the type of storage
device.
The
Disk Bad
column displays the percentage
of bad sectors.
y
Not formatted
–
The device is not formatted.
y
Good
–
Less than user-defined percentage of bad
disk sections is damaged.
y
Bad –
More than user-defined percentage of bad
disk sections is damaged.
Summary of Contents for 4-channel DVR
Page 1: ......
Page 2: ......
Page 68: ...User s Manual 60...
Page 77: ...4 Channel Digital Video Recorder 69 Map of Screens...