BC
Broadcast
8
���������
VU Meters
VU Meters can be used al-
ternatively for each meter.
In addition, LED and VU
meters can be mixed in
any way. The VU-meters
are brand Sifam. Theyfit
into two channel slots.
Two meters can be in-
stalled, one above each
other. The meters have
an active rectifier circuit with level adjustment. The attack and release time is
300 ms. The lead can be adjusted to any desired value.
RTW-Peakmeter
Different versions of 200 segment plasma bar-graph meters, brand RTW, Ger-
many can be installed. These meters can be used for each sour-
ce, alternatively to LED-PPM‘s and VU Meters. The Series 1000
devices can be mounted vertically and fit into the module grid.
This series is best choice for use with the BC4 system.
Devices in standard cassette housings 190 x 40 mm (type 1113,
1115 or 1119) must be installed horizontally. A maximum of 2
devices, one above each other can be installed. Special front
panels are available for both, the Series 1000 and Series 1100
units. Phase correlation meters are available as well.
The pictures on this page show some of the available versions.
Please check the RTW website (www.rtw.de) for details about
the different versions.
All RTW devices need special front panels and special wiring.
These meters do not fit into the standard meter frameboards.
The series 1000 can be adapted to the frame PCB‘s while the
series 1100 devices require a frame slot where no PBC‘s are
installed.
Loudspeakers
For use as PFL and talkback loudspeaker we offer an active mini speaker that
fits into the meter bridge. One or two speakers can be used in a console. Th-
ey are normally driven by the mini speaker output and can be used in stereo
if two system are installed.The loudspeakers are equipped with
coax wide-band systems. The 8 watts power amplifier is supplied
from a separate voltage that is available with all power supply
units. The speaker fits into 4 meter bridge slots.
Additional devices
The picture shows
a TFT multifunc-
tion display, RTW
Portamonitor. Such
devices can be inte-
grated into the me-
terbridge with spe-
cial made front pa-
nels if they fit into
the height of the
top plate (145 mm)
and if the depth is
not more than 100
mm. Please ask for
details.
