MES9000 series
−
Instruction manual v1.1
48
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
10.3 Removing and installing the Hilscher netJACK module
10.3.1
Removal
Fully pull the
pull tab
out (e.g. using flat-nose pliers).
Pull the module out approx. 5 mm.
Then,
lift the module a bit
to lift the metal brackets out of
the circuit board.
FYI: Section 10.3.3 shows how the metal brackets are
inserted into the circuit board.
5 mm