MES9000 series
−
Instruction manual v1.1
50
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
10.3.3
FYI: Fixing the module to the circuit board
The module is clamped onto the circuit board with
four
metal brackets
.
The metal brackets must be inserted into the
recesses
in the circuit board:
... and finally,
pushed onto the circuit board
, where they will click into place with a slight pressure.
For the purposes of illustration, this image shows the back of the circuit board (usually not visible) with
the metal brackets fully inserted:
