
Transport
Page
14
of
21
All-in-one ultra-fast charging system - brief operating instructions
Version: 1.4
3.3 Temporary storage of the system and batteries
The system is suitable for outdoor installation only if the voltage supply and climate control is provided.
If the system is not to be put into operation immediately, please observe the following information on
temporary storage.
3.3.1 Temporary storage of the battery modules
CAUTION
Observe correct storage of the battery modules!
Incorrect storage can result in damage to the components.
Until the battery modules are installed, store them properly according to the
specifications in the mnual.
Avoid direct sunlight and large temperature fluctuations.
3.3.2 Temporary storage of the system
CAUTION
Observe correct storage of the system!
Incorrect storage can result in damage to the components.
Until the fast charging system is installed, store it at a dry and covered location at
a temperature range of +5 to +35 °C.
Avoid direct sunlight and large temperature fluctuations. The display sides of the
system must not be exposed to direct sunlight.
Climate control of the system and display sides only starts when the system is
put into operation.
3.3.3 Temporary storage of the fully equipped system outdoors (brief period
only)
CAUTION
Do not install outdoors without providing the voltage supply and climate
control!
Without climate control, components can be damaged.
Without climate control, the system may be installed outdoors only for a short
period, otherwise humidity can form.
Avoid direct sunlight and large temperature fluctuations. The display sides of the
system must not be exposed to direct sunlight.
Note that the voltage supply and climate control must be switched on for correct operation of the system
outdoors.
Temporary storage of the system outdoors without the voltage supply and climate control switched on
must always be avoided or must be kept as short as possible (max. 5 days, depending on the prevailing
environmental conditions), otherwise components can be damaged and the warranty invalidated.
Therefore make preparations for installation, modification or service work in good time prior to delivery
or shutdown of the system.