17
1.1.6 Powering the Printer Base
WARNING:
THE Centra HS PRINTER IS AVAILABLE IN TWO POWER MODELS. YOU MUST
ORDER THE CORRECT MODEL FOR YOUR POWER SOURCE. DO NOT PLUG PRINTER IN
IF YOUR POWER SOURCE DOES NOT MATCH THE PRINTER MODEL YOU ORDERED.
Power requirements:
Centra HS Print Base & Printer: 720 watts voltage input ranges
100-132 VAC / 47-63 Hz or 180-240 VAC / 47-63 Hz
Important Note:
Use of a HIGH QUALITY surge protector or uninterruptible power supply is
REQUIRED by Allen Datagraph Systems. Failure to do so could affect your warranty coverage
if a problem arises due to improper power connection.
CAUTION:
The power cord is a three-conductor cable that incorporates a safety (earth) ground
connection. For the machine to operate safely and correctly, the power cord must be plugged into
an outlet that has an earth ground contact. Never plug the power cord into a two-prong outlet by
using a 3=2 cord adapter.
CAUTION:
Never allow roll or sheet goods to rub on the power cord because the material can cut
the cord causing an electrical fire hazard!
Connect the power supply cable to the power port on the back side of the machine and to your
surge protector or UPS (as noted in Site Preparation).
Summary of Contents for iTech Centra HS
Page 2: ...02...