background image

U.S. Patent No. 8,856,780

MODULE DIAGNOSTICS

 - 1 OF 1

TEST MODULE

LED 1 ST

ATUS

DIA

GNOSTIC

I

DURING MODULE PROGRAMMING

Flashing RED

Missing/wrong information from fi rmware or vehicle.

Solid RED

Module waiting for more vehicle information.

Flashing GREEN

Additional steps required to complete module programming.

Solid GREEN then OFF

Module correctly programmed.

OFF

No activity or module already programmed.

II

DURING TACH PROGRAMMING

1 GREEN fl ash

Tach signal programmed in Analog

2 GREEN fl ashes

Tach signal programmed in Data

3 RED fl ashes

No tach signal detected

4 RED fl ashes

System is in valet mode

5 RED fl ashes

Tach set for ‘VTS’.  No tach programming required

6 RED fl ashes

Tach set for ‘assumed start’.  No tach programming required

III

DURING REMOTE START

Flashing RED

Module incorrectly programmed.

Solid RED

Module incorrectly programmed.

Flashing GREEN

Module correctly programmed and operational.

Solid GREEN then OFF

Reset in progress.

OFF

Invalid ground when running status from remote starter.

IV

WITH IGNITION OFF

Flashing RED

Module incorrectly programmed or connected.

Solid RED

Module not programmed. Waiting for more vehicle information.

Flashing GREEN

False ground when running status from remote starter.

Solid GREEN then OFF

Reset in progress.

OFF

Module at rest and ready for a remote start sequence.

www.idatalink.com

Automotive Data Solutions Inc. © 2016

HC2351AC

PAGE 10 OF 12

• 20161024

Summary of Contents for idatastart HC2351AC













Reviews: