Adria Motorhome 2012, Owner'S Manual

Page: 67 / 187

D D
Power supply
10
Adria Motorhomes 67
10 Power supply
10.1 230 V power supply
The vehicle can be connected to an external power supply with 230 V which must be protected
with a 30 mA ground-fault circuit breaker (fault current).
10.1.1 Making the electrical connection between the vehicle and the
power source
The connection of the vehicle to the external 230 V power supply must be made with a rubber
sheathed cable "H0 RN-F 3G 2.5 mm
2"
or an equivalent cable with connectors according to
"IEC 309". The overall length of the electric cable should not exceed 25 m!
Connecting:
When making the connection, always begin on the vehicle and make the connection to
the power source last.
Disconnect in reverse sequence.
Caution!
Short-circuit, corrosion and cable break
For your own safety, have the electrical system checked at least once a year by an
authorised workshop.
Caution!
Danger of overheating of the cable on the cable reel
Always unroll the cable completely from the cable reel. This prevents overheating of the
cable.
Use a cable reel with integrated overheat protection.
Important!
• Connectors and sockets do not fit in every country.
• It is possible that an adapter set is required for the country being visited.
Fig. 48 230 V mains connection
1 CEE motorcar input socket
2 CEE extension cable (special
accessory) with a minimum cross-
section: 2.5 mm
2
.
3 Power source
1
3
2