ADRF PSR-VU-9537-UA, Manual

Page: 42 / 60

Advanced RF Technologies, Inc. 42
7.3.1 General Settings
The General Settings section allows the user to enable/disable amplifiers and the ALC routine.
Figure 7-10 Control Tab
–
General Setting

ALC ON
: Enables or disables Automatic Level Control (ALC)

DL HPA On : Enables or disables the Downlink High Power Amplifier

UL HPA On
: Enables or disables the Uplink High Power Amplifier

Remote Power Switch
: Enables or disables the Remote Power Switch function. Note: Remote Power Switch
needs to be disabled for UL 2524.
To enable/disable any of the settings, click on the checkbox and click the Apply button.
7.3.2 System
Under the System section, the user is able to perform a soft reboot on the repeater and also can restore factory
default settings.
Figure 7-11 Control Tab
–
System

Reboot
: Performs a soft reboot of the repeater

Factory Set : Restores all settings to factory defaults
7.3.3 Manual Gain Control
Figure 7-12 Control Tab
–
Manual Gain Control

DL/UL Gain : Gain levels of the repeater can be specified here

DL/UL ALC Level
: Prevents the output power from exceeding the specified value

DL/UL Output ALC Offset : If any ALC attenuation has been applied, the system will release this attenuation
when the signal level drops by the specified level