Epoch-III-P8024/8030/8037NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document
Page 26 of 41
SNMP
Type in the assigned Site/Cascade ID and Manager IP Address.
Default Site ID is ADRF.
Default Manager IP address 100.10.10.100
Repeater
Click the
Install
button to automatically setup the repeater.
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display “
Installation Successfully Completed
” messa
ge.
C
lick on
Status
tab
, the Installation box now changes from “Not Installed” to
“Installed
.”
If the Epoch-III-P8024/8030/8037NM detects a problem during the installation
process, it will show a prompt message, e.g., “Modem is not detected.” Please
follow the instructions and address the problem to finish the installation process.
If the problem persists, please contact our technical support.
Repeater Location
Please type in the physical address where the repeater is installed.
Repeater Installer Info
Please type in the installer’s name, phone number and e-mail address for technical
support.
Repeater Static IP
: Will display the Repeater’s Static IP Address, Subnet Mask,
and Gateway. This information is necessary when using the Repeater in
conjunction with the External Modem Box. Default values are:
Repeater IP
: 192.168.63.5
Subnet Mask
: 255.255.255.0
Gateway
: 192.168.63.254
Date and Time
: Sets the date and time for the internal clock (required for Log
Messages)
