Epoch-III-P8024/8030/8037NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document
Page 14 of 41
2.3
Installation
2.3.1
Tools
No special tools or equipments are needed to install the Epoch-III-
P8024/8030/8037NM.
2.3.2
Procedure
Six mounting holes are located on the wall-mounting bracket to attach it to the
wall. The wall bracket must be securely attached to sufficiently carry the
weight of the Epoch-III-P8024/8030/8037NM, which is bolted to the wall
bracket through the four aligned mounting holes.
The following steps should be followed while mounting the repeater:
Installation Procedure
①
Take the Epoch-III-P8024/8030/8037NM out of the box
②
Using the six anchor bolts, mount the bracket on the wall
③
Make sure the bracket is securely mounted
④
Slightly tilt the repeater and mount the repeater onto the wall as shown in
the picture. Hook the upper 2 guard screws first and then slide/push in
the lower 2 guard screws into the place.
⑤
Make sure the Epoch-III-P8024/8030/8037NM is securely placed onto the
wall bracket
⑥
Fasten the 8 bracket screws back properly
⑦
Inspect that everything is secure
* Rack Mount option is also available. Please contact ADRF for additional
information.
