Duo-i6515/6525/8030NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document
Page 13 of 40
2.2.2.
AC Power Switch & DC Power Port for External Modem Box
The AC Power on/off switch is located on the bottom of repeater (Figure 5).
The switch should be powered on after the repeater has been installed properly.
The DC Power Port can be used to provide power to the optional External
Modem Box (Figure 5).
2.2.3.
Mode Selection Switch and Ethernet Port
The Ethernet port and the Mode Selection Switch for DHCP are located on
bottom of the repeater as shown below in Figure 6. The mode selection
switch has two modes: Host Mode & Remote Mode.
Figure 5 – AC Power Switch & DC Power Port
Figure 6 – Ethernet Port & Mode Selection Switch
