Quick Start Setup Guide
NOTE: Please follow the Assembly Guide and Mounting Instructions for
your Supplied USB Antenna.
To Configure with a Ethernet Cable:
Although the CC Vector can be set up from a tablet or a smartphone, it may be
easier to use a computer using the included 18” Ethernet cable.
Connect the Ethernet cable to your computer’s Ethernet port and to either of the
CC Vector’s Ethernet ports on the back of the device.
Configure Wirelessly (most popular way):
1. From your computer, tablet, smartphone or
WiFi device, go to the WiFi Settings/Connections
and connect to the
WiFi Name
listed
on the sticker underneath the CC Vector.
2. Enter the
WiFi Password
when prompted.
1
WiFi Name
WiFi Password
NOTE:
Please do not skip any steps.
START HERE:
Attach Repeater’s
Antenna
Plug AC Power
into Wall
Connect Power
Rev 14_4/2018
CC Vector
WiFi Repeater
OR
B
1
A
A
B
2
Leave this one
unplugged
Connect other end of the USB cable to the USB Antenna.
Plug USB into
the CC Vector
