ADPRO VM22A, Issue 6
3
To the extent permitted by law, your sole recourse for any defect of, damage to, or
performance standard of the ADPRO Product will be under the express warranties the
General Terms and Conditions (if applicable) and Vision Fire & Security will in no event
be liable to pay any amount or damages resulting from or in connection with the
ADPRO Product.
To the extent by law that any limitation or exclusion can not apply, the total liability of
Vision Fire & Security in relation to the ADPRO Product is limited to:
(a)
in the case of services, the cost of having the services supplied again; or
(b)
in the case of goods, the lowest cost of replacing the goods, acquiring
equivalent goods or having the goods repaired.
To the extent permitted by law, Vision Fire & Security has no liability with respect to
damage to or arising out of, or the condition or performance of, the ADPRO Product
resulting from negligence or improper use, storage, installation, configuration or
handling of the ADPRO Product (where ‘improper’ includes treatment other than in
accordance with the ADPRO Manual, these terms and conditions or the in formation
provided at a training session); or accident, unforeseeable circumstances or
disaster; or modifications to the ADPRO Product other than in accordance with
Vision Fire & Security' instructions; or attachment of or interoperation with features,
software or products not approved by Vision Fire & Security in writing; or where the
ADPRO Product has been serviced by persons not authorised by Vision Fire &
Security in writing to service the ADPRO Product.
Lightning or Related Voltage Surges
ADPRO equipment malfunction caused by lightning or related voltage surges is
specifically exempted from the warranty conditions of Vision Fire & Security Pty Ltd.
Vision Fire & Security Pty Ltd reserves the right as to final determination of whether
or not an equipment malfunction was caused by lightning or related voltage surges.
4.0 Introduction
The ADPRO VM22A Audio Switcher adds audio switching capability to the ADPRO
FastVu Digital Video and Audio Transmission System and ADPRO Fast Scan Video
Transmission System. Unless annotated otherwise, all references to ADPRO FastVu
also refer to Fast Scan. Each VM22A can switch audio from the FastVu audio output to
one of 10 loudspeakers, and one of 10 microphones attached to the VM22A to the
FastVu audio input. The VM22A delivers up to 1W (max) into an 8ohm loudspeaker via
an internal audio amplifier or 4 Watts (max) using an external power amplifier.
The VM22A provides manual gain or AGC control of the microphone/line input signals,
with audio level LEDs indicating both normal and excessive audio input levels. Audio
output from the FastVu can be routed to channel 1 (broadcast out mode) regardless of
the channel selected by the FastVu, as can the microphone/line input from channel 1
be routed to the FastVu audio input (broadcast in mode) regardless of the channel
