ADPRO VM22A, Issue 6
13
5.7
Manual Volume Setup
This procedure describes how to setup the appropriate input and output levels for
the microphones and speakers. A person will be required at the Transmitter and
Receiver end.
1.
Establish a connection with the remote site.
2.
Enable audio from the Receiver to the Transmitter (refer to the FastVu’s
User Manual for details).
3.
Display the required channel.
4.
While one person speaks into the microphone at the Receiver, adjust the
respective output level potentiometer for the particular channel on the
VM22A at the transmitter end to a suitable level.
5.
Repeat for all the Transmitter speakers.
6.
Repeat the above with audio enabled from the Transmitter to the Receiver,
substituting the output level potentiometers for the input level
potentiometers.
Figure 5 – FastVu Transmitter connected to multiple VM22A’s
