Adp 40000 Series Installation Manual Download Page 2

The information in this document is subject to change without notice and should not be construed as a commitment 
by ADP, Inc.   ADP is not responsible for any technical inaccuracies or typographical errors which may be contained 
in this publication. Changes are periodically made to the information herein, and such changes will be incorporated 
in new editions of this publication. ADP may make improvements and/or changes in the product and/or the programs 
described in this publication at any time without notice. 

This document or any part thereof may not be reproduced in any form without the written permission of Kronos 
Incorporated. All rights reserved. © 2001, Kronos Incorporated.

ADP provides this publication "as is" without warranty of any kind, either express or implied, including, but not limited 
to, the implied warranties of merchantability or fitness for a particular purpose.

The ADP Logo is a registered trademark of ADP of North America, Inc. Enterprise eTIME is a trademark and eTIME 
is a registered trademark of Automatic Data Processing, Inc.

CardSaver, Datakeeper, Datakeeper Central, Gatekeeper, Gatekeeper Central, Imagekeeper, Improving the 
Performance of People and Business, Jobkeeper, Jobkeeper Central, Keep.Trac, Kronos, the Kronos logo, 
ShopTrac, ShopTrac Pro, the ShopTrac logo, Solution In A Box, Start.Time, TeleTime, Timekeeper, Timekeeper 
Central, TimeMaker, and VisionWare are registered trademarks of Kronos Incorporated. CommLink, Comm.Mgr, 
DKC/Datalink, HyperFind, Kronos Connect, Kronos e-Central, Labor Plus, Prism, Smart Scheduler, Starter Series, 
Start.Labor, Start.Quality, Start.WIP, Tempo, the Tempo logo, Timekeeper Decisions, Timekeeper Express, 
Timekeeper Web, Workforce Activities, Workforce Accruals, Workforce Central, Workforce Central Suite logo, 
Workforce Decisions, Workforce Express, Workforce Manager, Workforce Scheduler, Workforce Smart Scheduler, 
Workforce TeleTime, Workforce Timekeeper, Workforce Genie, Workforce Professional, Workforce Mobile Time, and 
Workforce Web are trademarks of Kronos Incorporated.

Adaptive Server is a trademark of Sybase, Inc. iSeries and WebSphere are trademarks, and AIX, AS/400, and IBM 
are registered trademarks of International Business Machines Corporation. Lotus and 1-2-3 are registered 
trademarks of Lotus Development Corporation. Carbon Copy and OpenVMS are trademarks of Compaq Computer 
Corporation. pcAnywhere is a trademark of Symantec Corporation. Cognos, Impromptu, and PowerPlay are 
registered trademarks, and PowerCube is a trademark of Cognos Incorporated. Crystal Reports is a registered 
trademark of Crystal Decisions. Ethernet is a registered trademark of Xerox Corporation. HandLink is a trademark of 
Time and Technology Systems. HandPunch is a trademark of Recognition Systems Corporation. INFORMIX-OnLine 
is a registered trademark of Informix Software, Inc. INTERSOLV is a registered trademark of Intersolv, Inc. Java and 
all Java-based trademarks and logos referenced in this document are trademarks or registered trademarks of Sun 
Microsystems, Inc. in the United States and other countries. Microsoft and Windows NT are registered trademarks 
and Windows 95 is a trademark of Microsoft Corporation in the United States and/or other countries. Netscape and 
Netscape Navigator are registered trademarks of Netscape Communications Corporation in the United States and 
other countries. Net8 is a trademark, and ORACLE, SQL*Net, and SQL*Plus are registered trademarks of Oracle 
Corporation. NexTrak is a trademark of Intellisys Corporation. Corel and Quattro are registered trademarks of Corel 
Corporation or Corel Corporation Limited.  PeopleSoft is a registered trademark of PeopleSoft, Inc. Pervasive.SQL 
is a registered trademark of Pervasive Software Inc. in the United States and/or other countries. Show N Tel is a 
registered trademark of Brooktrout Technology, Inc. Solaris and Sun are registered trademarks of Sun 
MicroSystems, Inc. in the United States and other countries. UNIX is a registered trademark in the United States and 
other countries, licensed exclusively through X/Open Company Ltd. Velcro is a registered trademark of Velcro 
Industries B.V. Visual DataFlex is a registered trademark of Data Access Corporation. All other trademarks are the 
property of their respective owners.

Summary of Contents for 40000 Series



















Reviews: