ADOS S.R.L. Buccinasco (MI)
492-MTU10006
Rev. 4
Page 33 of 49
6.
INSTRUMENT CONTROL
6.1
Introduction
The A100E indicator is a programmable instrument that performs a set of functions which can be adapted
and/or personalized by the user to implement a variety of applications.
These functions can be modified using the configuration parameters.
Therefore, the instrument must be configured on the basis of the specific application before being used.
All the configuration parameters are maintained in non-volatile storage.
The parameter storage state is controlled when the instrument is turned on: if the result is negative the
instrument is automatically re-initialized with the base configuration and must be reconfigured and re-
calibrated.
During the instrument configuration process, the state of the signal LED’s remains congruent with that of the
process; however, the LED’s flash to indicate to the user that it is not in normal operating condition.
The thresholds associated to the relays are controlled normally.
If the serial is active, the status flag in the transmitted message indicates that the instrument is in the
configuration process.
