Suzhou Alston D.M Laser Technology Co., Ltd
DemonMao
10
Step 5: Press the "control signal" button in the picture (note: for safety, this button should be
turned off immediately after use).
Step 6: Turn the cleaning head toward the surface of the workpiece to be cleaned, and press the
button on the handle of the cleaning head to start cleaning.
Step 7: There are two working knobs on the side of the cleaning head. The “width adjustment” is
used to adjust the working width, the “speed adjustment” is used to adjust the scanning speed, and
the copper tube at the top of the cleaning head is used to connect the dust collector.
Step 8: After use, turn off the machine in reverse order.
3.3 Matters needing attention in the use of washing machine
1. When the laser cleaning machine is energized, it is forbidden to point the laser output head
toward someone, and it is forbidden to irradiate the laser output head on the surface of highly
reflective materials (such as copper, aluminum, mirror stainless steel and other highly reflective
materials).
2. Wear labor protection equipment according to the regulations, and wear protective glasses that
