Suzhou Alston D.M Laser Technology Co., Ltd
DemonMao
9
and other highly reflective materials).
Step 4: Display control operation (manual mode and linkage mode).
Manual mode
1) The startup page is shown in Figure 6;
2) Click the manual mode to enter the parameter setting page, where you can set the power and
frequency, as shown in Figure 7;
3) For parameter setting, click on the number with your finger, and then select the parameter after
the digital meter appears, and finally click "" to confirm;
Linkage mode
Click linkage mode to enter the parameter setting page, you can set power, frequency, speed and
width, the interface operation method is the same as manual operation
