Adly Motor ATV-600, Owner'S Manual

Page: 39 / 59

37
INSPECTION AND MAINTENANCE
Installation
1. Install the battery in reverse order of removal.
2. Check all bolts and other fasteners are secured.
NOTICE
：

This ATV uses a sealed type(maintenance-free)battery
；
never remove the battery caps.

In order to prevent electrical leakage and self-discharge when the battery sits idle for long
periods of time, remove the battery from ATV and store it in a well-ventilated and dimly lighted
area. Store battery out of reach of children. If the battery is to be kept on the ATV, disconnect
the battery’s negative cable

When replace the cables apply a thin coat of grease to the battery terminals when
reconnecting.
NOTICE
：

Keep the ATV battery clean. If the battery’s posts are corroded and/or are covered with white
powder clean them with water.

If there is obvious corrosion on the battery terminals, disconnect the battery cables and
remove the corrosion with steel brush.

If battery needs to be replaced, replace with a same sealed-type battery. (maintenance-free)