ADLY MOTO
2-6
CHECK AND ADJUST
ADJUSTING IDLE SPEED
ϡ
ʳ
Engine idle speed adjustment has to do it
when the engine is warm.
z
Connect with the rpm meter then starting
the engine.
z
Before adjusting the idle speed, make sure the
spark plug gap is correct. Also, turn the
handlebars from left to right and note
whether the idle speed changes. If it does,
the throttle cable may be incorrectly
routed. Be sure to correct this problem
before proceeding.
z
Adjust the idle speed adjust screw reach to
the normal idle speed.
The idle speed is about
1400
r
100 rpm.
IGNITION TIMING
The ignition system of this ATV is controlled by
C.D.I unit, thus don‘t need to adjust anything. If
the ignition timing isn’t correct then checking
the ignition system whether normally.
z
Remove the 14 mm A.C.G. cap.
z
Using the timing light to check the ignition
timing. When the engine speed running at
idle, the “F” mark of flywheel should aim at
the inspection hole.
Warning
Κ
Use screw driver to adjust the idle speed
to avoid injury.
