ADLY MOTO
2-5
CHECK AND ADJUST
VALVE ADJUSTING
Attention
Κ
ϡ
ʳ
When you check or adjust the valve, do it
when the engine temperature is low
( below 35
q
C)
z
Remove the timing hole plug and the
crankshaft hole plug with screwdriver.
z
Rotate the flywheel and keep the “T” line
aim at the centerline of the inspection hole.
z
Measure valve clearance with a feeler gauge
of the specified thickness.
z
To adjust the valve clearance, loosen the
locknut and turn the adjuster.
Attention
Κ
ϡ
ʳ
When you adjusting the valve, don’t
invert the crankshaft, otherwise cannot
adjust the exhaust valve.
Valve gap check and adjust
Valve gap
Κ
IN.
Κ
0.08 mm
EX.
Κ
0.12 mm
z
Loose the fixed nut and rotating the
adjusting nut reach to the proper gap.
z
Tie up the fixing nut and check the gap
again.
z
Using the valve gap tool to adjust the valve
gap.
