PXI Trigger I/O Functions
35
PXIe-3988
dest
Destination of trigger routing can be one of the following.
halfway
Halfway point of trigger routing. This parameter is used only
to route the software-generated trigger signal to the SMB
connector on the faceplate. In this case, the halfway should
be set as one of the trigger bus lines, otherwise as
PXI_TRIG_VAL_NONE.
Return Code
ERR_NoError
ERR_BoardNoInit
ERR_Set_Path
Available value
Description
PXI_TRIG_VAL_SMB
SMB connector on the faceplate
PXI_TRIG_VAL_TRIG0
PXI trigger bus #0
PXI_TRIG_VAL_TRIG1
PXI trigger bus #1
PXI_TRIG_VAL_TRIG2
PXI trigger bus #2
PXI_TRIG_VAL_TRIG3
PXI trigger bus #3
PXI_TRIG_VAL_TRIG4
PXI trigger bus #4
PXI_TRIG_VAL_TRIG5
PXI trigger bus #5
PXI_TRIG_VAL_TRIG6
PXI trigger bus #6
PXI_TRIG_VAL_TRIG7
PXI trigger bus #7
Available value
Description
PXI_TRIG_VAL_NONE
No halfway point
PXI_TRIG_VAL_TRIG0
PXI trigger bus #0
PXI_TRIG_VAL_TRIG1
PXI trigger bus #1
PXI_TRIG_VAL_TRIG2
PXI trigger bus #2
PXI_TRIG_VAL_TRIG3
PXI trigger bus #3
PXI_TRIG_VAL_TRIG4
PXI trigger bus #4
PXI_TRIG_VAL_TRIG5
PXI trigger bus #5
PXI_TRIG_VAL_TRIG6
PXI trigger bus #6
PXI_TRIG_VAL_TRIG7
PXI trigger bus #7
Summary of Contents for PXIe-3988
