ADLINK Technology PXIe-3988, User Manual

Page: 36 / 81

24 Getting Started
4. Locate the four screws (two on each side, as shown) fix-
ing the hard drive, and remove them.
5. To install an HDD, SSD, or other compatible SATA hard
drive, reverse the steps and reinstall the PXIe controller
into the PXI system.
2.2.4 Replacing the Battery Backup
The PXIe-3988 is provided with a 3.0 V “coin cell” lithium battery,
replacement of which is as follows.
1. Turn off the PXI chassis.
2. Remove the PXIe controller from the chassis. Observe
all anti-static precautions.
3. To remove the battery, gently insert a small (approx. 5
mm) flathead screwdriver under the battery at the nega-
tive retaining clip. Gently pry up and the battery should
easily pop out.