ADLINK Technology NuPRO-842 Series User Manual Download | Manualshive

Page: 50 / 62

background image

38

Device Driver Installation

Installing the Drivers for Windows 2000/XP

1. Boot Windows 2000/XP.

2. The driver is included in the ADLINK CD. Run the

win2k_xp131.exe under the directory: X:\CHIP-
DRV\VGA\I845GV.

3. Click Next> on Welcome screen. And select Typical on

Setup Type screen and click Next>.

4. Use default program folders on Select Program Folder

screen. Click Next> to install driver. Finally, click Finish
to re-start.

LAN Driver Installation

This section describes the LAN driver installation for the onboard
Ethernet controllers, the Intel 82540EM . The relative drivers are
located in the following directory of the ADLINK CD: X:\CHIP-
DRV\LAN.

The Intel LAN drivers supports the following OS or platforms: Win-
dows 98 SE, Windows ME, Windows NT 4.0, Windows 2000, Win-
dows XP, and Linux

All the above drivers are included in the ADLINK CD. Driver Instal-
lation information for Windows systems is included below. For LAN
driver installation of other OS’s, please refer to the readme file in
the CD.

Driver Installation on Windows 2000/XP

Windows 2000 may automatically try to install a LAN driver
within its directory. We recommend that users manually install
the latest LAN driver, which comes with the ADLINK CD to
guarantee compatibility. After installing Windows 2000, please
update to the new drivers by following these procedures.

«
...
48
49
50
51
52
...
»

Summary of Contents for NuPRO-842 Series































































Reviews:

No comments

Related manuals for NuPRO-842 Series

Brand: Yamaha Pages: 497

Brand: Gigabyte Pages: 58

cpuModules CME34BT

Brand: rtd Pages: 110

DUOX Programmer

Brand: Fermax Pages: 99

Brand: Linear Pages: 16

THUNDER I7501 XTREME

Brand: TYAN Pages: 48

Brand: Intel Pages: 36

Brand: Micronics Pages: 80

Brand: C&T Solution Pages: 90

Spacewalker AV40

Brand: Shuttle Pages: 81

Brand: ASROCK Pages: 162

Brand: Abit Pages: 134

Lanparty JR P45-T2RS

Brand: DFI Pages: 146

Brand: DFI Pages: 138

Brand: Asus Pages: 64

Brand: Asus Pages: 144

Brand: Asus Pages: 96

Brand: Asus Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands