ADLINK Technology NuPRO-842 Series User Manual Download | Manualshive

Page: 48 / 62

background image

36

Device Driver Installation

1. Check the System Requirements. Windows

98/ME/2000/XP must be fully installed and running on
the system prior to running this software.

2. Close any running applications.

3. The files are stored in an integrated application setup

program. This program is designed for a Windows
98/ME/2000/XP program that allows the INF files to be
installed.

4. Locate the directory X:\CHIPDRV\Chipset\I845GV in the

CD-ROM, and then Run Setup.exe.

5. Click 'Next' on the Welcome screen to read and agree to

the license agreement. Click Yes if you agree to con-
tinue. NOTE: If you click No, the program will terminate.

6. Click ‘Next’ on Readme Information screen to install INF

files.

7. Click 'Finish' and restart the system when prompted.

8. Follow the screen instructions and use the default set-

tings to complete the setup when Windows restarts.
Upon restarting, Windows will display that it has found
new hardware and is installing drivers. If the New Hard-
ware Found dialog box is displayed requesting the loca-
tion of the drivers, use the mouse to click on the scrollbar
and click on the <Windows directory>.

9. Select Yes, when prompted to restart Windows.

4.2 Driver Installation

VGA Driver Installation

This section provides information on how to install the VGA driver.
Please follow the instructions carefully.

Installing Drivers for Windows 98/ME/NT/2000/XP

The following section describes the normal display driver instal-
lation procedures for Windows 98/ME/NT/2000/XP.

«
...
46
47
48
49
50
...
»

Summary of Contents for NuPRO-842 Series































































Reviews:

No comments

Related manuals for NuPRO-842 Series

Brand: QDI Pages: 69

Brand: ST Pages: 15

Brand: Freescale Semiconductor Pages: 28

Brand: Fairchild Pages: 17

Kontron pITX-iMX8M

Brand: S&T Pages: 65

Brand: Intel Pages: 113

Brand: Acorp Pages: 66

Brand: BCM Pages: 93

Brand: Gigabyte Pages: 37

Brand: MSI Pages: 85

Brand: JETWAY Pages: 41

Brand: DFI Pages: 150

Brand: Gigabyte Pages: 19

Brand: Texas Instruments Pages: 14

LanParty UT nF3 250 Gd

Brand: DFI Pages: 117

LanParty UT CFX3200-DR

Brand: DFI Pages: 173

Brand: GE Pages: 4

Brand: GE Pages: 81

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands