ADLINK Technology NuPRO-842 Series User Manual Download | Manualshive

Page: 13 / 62

background image

Introduction

1

NuPRO-842

1

Introduction

The NuPRO-842 is a full-size PICMG 1.0 Pentium 4-based Single
Board Computer (SBC) with Intel 845GV chipset. It supports both
PCI and ISA buses.

The CPU module supports a front side bus (FSB) of 533MHz and
a maximum CPU clock of 3.06 GHz featuring 32-bit/33MHz
PCI/ISA bus with up to 2GB high performance DDR host SDRAM
support.

It provides standard I/Os, including RS-232, Printer Port, USB 2.0,
EIDE, Ethernet, and video interfaces. The NuPRO-842 is
designed to meet the needs of applications that require the high-
est computing performance and reliability. It is designed to run on
Windows 2000/XP, Linux, and other operating systems, as well as
embedded real time applications. It is the ideal solution for tele-
communications, Internet, and inindustrial networking applica-
tions.

This chapter is designed to give you an overview of the
NuPRO-842 SBC. The chapter covers the following topics:

X

Unpacking and Checklist

X

Features

X

Specifications

1.1 Unpacking Checklist

Check the shipping carton for any damage. If the shipping carton
and contents are damaged, notify the dealer for a replacement.
Retain the shipping carton and packing materials for inspection by
the dealer. Obtain authorization before returning any product to
ADLINK.

Check the following items are included in the package, if there are
any items missing, please contact your dealer:

«
...
11
12
13
14
15
...
»

Summary of Contents for NuPRO-842 Series































































Reviews:

No comments

Related manuals for NuPRO-842 Series

Brand: CompuLab Pages: 31

IP-M945A SERIES

Brand: WEALTHTEC Pages: 72

Brand: Advantech Pages: 4

Brand: TYAN Pages: 64

Brand: Microchip Technology Pages: 34

Spartan-7 SP701

Brand: Xilinx Pages: 4

Brand: AIC Pages: 58

Brand: Advantech Pages: 88

Brand: Supero Pages: 89

KXTJ3-1057-EVK-001

Brand: Rohm Pages: 3

Brand: Semtech Pages: 16

Brand: Mach Pages: 86

X99A WORKSTATION

Brand: MSI Pages: 97

Gamefisher 298.586180

Brand: Gamefisher Pages: 23

SIDE POWER SRH 240 TC

Brand: SLEIPNER MOTOR AS Pages: 28

MVME61006E-0161

Brand: Emerson Pages: 100

MVME6100 Series

Brand: Emerson Pages: 118

Brand: Emerson Pages: 122

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands