Installation
•
7
2
Installation
This chapter provides information on how to use the jumpers and connectors
on the NuPRO-770 in order to set up a workable system. The topics covered
are:
¾
CPU Installation
¾
Memory Installation
¾
Jumpers Setting
¾
Connectors Pin Assignments
¾
Watchdog timer configuration
2.1 CPU
Installation
The NuPRO-770 industrial computer Main board supports a Socket-370
processor socket for Intel Celeron, Pentium III FC-PGA processors.
Before inserting the CPU, make sure the notch on the corner of the CPU
corresponds with the notch on the inside of the socket.
After you have installed the processor into place, check if the jumpers for the
CPU type and speed are correct.
Note:
Ensure that the CPU cooler does fully contact with the CPU top
surface to avoid CPU overheating that would cause your system
to hang or be unstable.
