ADLINK Technology NuPRO-710 Series, User Manual

Page: 47 / 67

BIOS Setup
•
39
4.5 Power Management Setup
Power Management Setup controls the mainboard’s “green” features. The
features shut down the video display and hard disk to save energy.
The Power Management Setup Screen
This category allows you to select the type (or degree) of power saving and
is directly related to the following modes:
1. Doze Mode
2. Standby Mode
3. Suspend Mode
4. HDD Power Down
There are four selections for Power Management, three of which have fixed
mode settings.
Disable (default) No power management. Disables all four modes
Min. Power
Saving
Minimum power management. Doze Mode = 1 hr. Standby Mode = 1
hr., Suspend Mode = 1hr., and HDD Power Down = 15 min.
Max. Power
Saving
Maximum power management - ONLY AVAILABLE FOR SL CPU.
Doze Mode = 1 min., Standby Mode = 1 min., Suspend Mode = 1 min.,
and HDD Power Down = 1 min.
User Defined
Allows you t o set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr, except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
ROM PCI/ISA BIOS (2A69KMHB)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Enabled ** Reload Global Timer Events **
Power Management : Disabled IRQ[3 - 7, 9 - 15], NMI : Disabled
PM Control by APM : Yes Primary IDE 0 : Disabled
Video Off Method : V/H SYNC+Blank Primary IDE 1 : Disabled
Video Off After : NA Secondary IDE 0 : Disabled
MODEM Use IRQ : NA Secondary IDE 1 : Disabled
Floppy Disk : Disabled
Doze Mode : Disabled Serial Port : Disabled
Standby Mode : Disabled Parallel Port : Disabled
Suspend Mode : Disabled
HDD Power Down : Disabled
Throttle Duty Cycle : 12.5%
ZZ Active in Suspend : Disabled
PCI/VGA Act-Monitor : Disabled
Soft -Off by PWR-BTTN : Instant-Off
CPU FAN Off In Suspend : Enabled
Resume by Ring
: Disabled ESC : Quit
↑↓→←
: Select Item
IRQ 8 Break Suspend : Disabled F1 : Help PU/PD/+/- : Modify
F5 : Old Values (SHIFT) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults