32
•
BIOS Setup
4.3
BIOS Features Setup
“BIOS FEATURES SETUP” is a list of system configuration options. Some
entries are default required by the mainboard’s design. Others will improve
your system’s performance if enabled, or let you set up some system
features according to your preference.
BIOS Features Setup Screen
ROM PCI/ISA BIOS (2A69KMHB)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Virus Warning
: Disabled
Video BIOS Shadow
: Enabled
CPU Internal Cache
: Enabled
C8000 -CBFFF Shadow
: Disabled
External Cache
: Enabled
CC000-CFFFF Shadow
: Disabled
Quick Power On Self Test
: Disabled
D0000 -D3FFF Shadow
: Disabled
Boot Sequence
: C, A
D4000 -D7FFF Shadow
: Disabled
Swap Floppy Drive
: Disabled
D8000 -DBFFF Shadow
: Disabled
Boot Up Floppy Seek
: Enabled
DC000-DFFFF Shadow
: Disabled
Boot Up NumLock Status
: On
Boot Up System Speed
: High
Gate A20 Option
: Fast
Memory Parity Check
: Enabled
Typematic Rate Setting
: Disabled
Typematic Rate (Chars/Sec)
: 6
Typematic Delay (Msec)
: 250
Security Option
: Setup
ESC : Quit
↑↓→←
: Select Item
PCI/VGA Palette Snoop
: Disabl ed
F1 : Help
PU/PD/+/- : Modify
OS Select For DRAM > 64MB
: Non-OS2 F5 : Old Values (SHIFT) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
A section at the lower right of the screen explains how to navigate and make
changes. The controls are the same as for the Standard CMOS Setup.
If you need information about what changes to make, highlight an entry and
press the <F1> key. A pop-up help menu will display information about the
highlighted item. Press the <F5> key to recall the last set of values saved for
this page. Pressing the <F6> key loads the BIOS default values for this page
and <F7> loads the Setup default values.
The following explains the options for each entry and indicates the default
settings (Setup Defaults) for this screen.
Virus Protection
The “Virus Warning” default setting is “Disabled”. This feature protects the
boot sector and partition table of your hard disk. Any attempt to write to them
will halt the system and cause a warning message to appear. If this
Summary of Contents for NuPRO-710 Series
Page 2: ......
Page 4: ......
Page 6: ......
Page 12: ...4 Introduction 1 3 Board Layout Jumpers and Connectors NUPRO 710 NUPRO 711...