ADLINK Technology NuIPC cPCI-3700, User Manual

Page: 11 / 20

Introduction • 3
Ø
DMI BIOS Support: Desktop Management Interface (DMI) allows users
to download system hardware-level information such as CPU type, CPU
speed, internal / external frequencies and memory size.
Ø
Multi I/O: Winbond W83977TF
Ø
Parallel Port: One high-speed parallel port, SPP/EPP/ECP mode
Ø
Serial Port: Two 16550 UART compatible ports configurable as RS232,
COM1 at front panel and COM2 at J2 rear I/O connector.
Ø
Enhanced IDE: Bus Mastering EIDE, one internal EIDE interfaces,
support Ultra DMA/33 IDE hard disk. A 2.5” inch hard disk is default
installed. To install DOM is possible.
Ø
FDD: One floppy drives is default installed (360KB, 720KB, 1.2MB,
1.44MB). In two-slots width version of cPCI-3700, no FDD space is
available.
Ø
CRT: C&T 69000 chipset
•
Embedded 2MB SDRAM display memory
•
1280x1024x8bpp colors CRT resolution
Ø
USB Interface: Two USB connectors, compliant with USB Specifications
Rev. 1.1
Ø
DiskOnChip: The SSD interface supports M-Systems DiskOnChip flash
disk supports system boot and storage capacity from 2MB to 144MB.
Ø
Watchdog Timer: 16-level, programmable
•
I/O port 0443H to enable watchdog.
•
I/O port 0441H to disable watchdog.
•
Time-out timing select 0/2/4/6/8/10/12/14/16/18/20/22/ 24/26/28/30
seconds (+/-20%).
Ø
Green Function: Power management via BIOS, activated through
mouse/keyboard movement
Ø
Keyboard and Mouse Connectors: PS/2 type mini-DIN that supports
PC/AT; supports a 5-pin external keyboard connector
Ø
Environmental and Mechanical:
•
Temperature: 0
°
C to 60
°
C
•
Humidity: 5% to 95%
•
PCB Layer: 8 layers
•
Dimensions: 100mm x 160mm (3.94" x 6.3") for PCB
•
Full Dimensions: 128mm x 160mm x 60 mm (3-slot)