ADLINK Technology NuIPC cPCI-3700, User Manual

Page: 16 / 20

8 • Installation
DSW1 (1-8): CPU Frequency Selector (reserved)
The original design of DSW1 is to match the CPU frequency. However,
due to the operating frequency of current CPU design is locked
internally. Therefore, no need any adjusting on this switch.
2.4 Connectors on the cPCI-3700
The connectors on the cPCI-3700 allows yo u to connect external devices such as
keyboard, floppy disk drives, hard disk drives, printers, etc. The following table
lists the connectors on cPCI-3700 and their respective functions.
The cPCI-3700 Processor Board
2.4.1 The cPCI-3700 Processor Board..........................................8
2.4.2 USB Connectors ......................................................................9
2.4.3 Parallel Port Connector...........................................................9
2.4.4 COM1 Serial Ports ...................................................................9
2.4.5 PS/2 Keyboard Connector....................................................10
2.4.6 PS/2 Mouse Connector .........................................................10
2.4.7 VGA CRT Connector..............................................................10
2.4.8 JP4: IrDA Connector ..............................................................12
2.4.9 EIDE Connector......................................................................12
2.4.10 J6:CPU Fan Power Connector ............................................14
2.4.11 Floppy Drive Connector........................................................14
2.4.12 CompactPCI Connectors .....................................................15
2.4.1 The cPCI-3700 Processor Board
Below shows a picture of the cPCI-3700 processor board and a drawing of
cPCI-3700 board showing the external connectors including USB, mouse,
keyboard, parallel port, COM port and VGA connector.
USB
K/B
Mouse
VGA
Printer port
J2
J1
RS232