40
Important Safety Instructions
Leading
EDGE COMPUTING
A Lithium-type battery may be provided for uninterrupted
backup or emergency power.
The device must be serviced by authorized technicians
when:
The power cord or plug is damaged
Liquid has entered the device interior
The device has been exposed to high humidity and/or
moisture
The device is not functioning or does not function
according to the User’s Manual
The device has been dropped and/or damaged and/or
shows obvious signs of breakage
Disconnect the power supply cord before loosening the
thumbscrews and always fasten the thumbscrews with a
screwdriver before starting the system up
It is recommended that the device be installed only in a
server room or computer room where access is:
Restricted to qualified service personnel or users familiar
with restrictions applied to the location, reasons therefor,
and any precautions required
Only afforded by the use of a tool or lock and key, or
other means of security, and controlled by the authority
responsible for the location
It is recommended that the device be installed in Informa-
tion Technology Rooms that are in accordance with Article
645 of the National Electrical Code and NFPA 75.
CAUTION:
Risk of explosion if battery is replaced with one of an incorrect
type; please dispose of used batteries appropriately.
BURN HAZARD
Touching this surface could result in bodily injury.
To reduce risk, allow the surface to cool before
touching.
Summary of Contents for NEON-2000-JT2-X Series
Page 8: ...viii List of Figures Leading EDGE COMPUTING This page is intentionally left blank ...
Page 10: ...x List of Tables Leading EDGE COMPUTING This page is intentionally left blank ...
Page 24: ...14 Connectors and I O Leading EDGE COMPUTING This page is intentionally left blank ...
Page 44: ...34 Getting Started Leading EDGE COMPUTING This page is intentionally left blank ...