ADLINK Technology nanoX-AL, User Manual

Page: 64 / 97

56
BIOS Setup
Feature Options Description
Device reset time-out 10 sec
20 sec
30 sec
40 sec
USB mass storage device Start Unit command time-
out.
Device power-up delay
Auto
Manual
Maximum time the device will take before it properly
reports itself to the Hot Controller.
‘Auto’ uses default value: for a Root po\rt it is 100 ms,
for a Hub port the delay is taken form Hub descriptor.
7.3.11. Advanced > Network
Feature Options Description
Onboard LAN Controller Disable
Enable
Enable / Disable Onboard Intel I210LM Lan controller.
Network Stack
Disable
Enable
Enable / Disable UEFI Network Stack.
7.3.12. Advanced > Miscellaneous
Feature Options Description
Miscellanous Info Only Control the PCI Express Root Port.
Smart Battery Function
Disable
Enable
Enable / Disable Battery Function
7.3.13. Advanced > Driver Health
Feature Options Description
Driver Name Info only Provides Health Status for the Drivers / Controllers.
7.3.14. Advanced > Trusted Computing
Feature Options Description
TPM20 Device Found Info Only
Security Device Support Disable
Enable
Enables or Disable BIOS support for security device.
OS will not show Security Device.
TCG EFI protocol and available.
Active PCR banks Info Only
Available PCR banks Info Only
Pending operation
None
TPM Clear
Schedule an Operation for the Security Device.
NOTE: Your Computer will reboot during restart in
order to change State of Security Device.
Platform hierarchy Disable
Enable
Enable or Disable Platform Hierarchy
Storage Hierarchy Disable
Enable
Enable or Disable Storage Hierarchy
Endorsement Hierarchy Disable
Enable
Enable or Disable Endorsement Hierarchy