ADLINK Technology nanoX-AL, User Manual

Page: 19 / 97

nanoX-AL
Pinouts and Signal Descriptions
11
3. Pinouts and Signal Descriptions
3.1. AB/CD Pin Definitions
The nanoX-AL is a Type 10 module supporting USB 3.0 and DDI channel on the AB connector. All standard pins of
the COM Express specification are described in the table below, including those not supported on the nanoX-AL.
Note:
Signals not supported on the nanoX-AL module are crossed out.
Table 1: nanoX-AL Type 10 COM.0 Rev. 3.0 Pin Definitions
Row A Row B
Pin Name Pin Name
1 GND(FIXED) 1 GND(FIXED)
2 GBE0_MDI3- 2 GBE0_ACT#
3 GB 3 LPC_FRAME# / ESPI_CS0#
4 GBE0_LINK100# 4 LPC_AD0 / ESPI_IO_0
5 GBE0_LINK1000# 5 LPC_AD1 / ESPI_IO_1
6 GBE0_MDI2- 6 LPC_AD2 / ESPI_IO_2
7 GB 7 LPC_AD3 / ESPI_IO_3
8 GBE0_LINK# 8 LPC_DRQ0# / ESPI_ALERT0#
9 GBE0_MDI1- 9 LPC_DRQ1#
/ ESPI_ALERT_1#
10 GB 10 LPC_CLK / ESPI_CK
11 GND(FIXED) 11 GND(FIXED)
12 GBE0_MDI0- 12 PWRBTN#
13 GB 13 SMB_CK
14 GBE0_CTREF 14 SMB_DAT
15 SUS_S3# 15 SMB_ALERT#
16 S 16 S
17 SATA0_TX- 17 SATA1_TX-
18 SUS_S4# 18 SUS_STAT# / ESPI_RESET#
19 S 19 S
20 SATA0_RX- 20 SATA1_RX-
21 GND(FIXED) 21 GND(FIXED)
22 USB_SSRX0- 22 USB_SSTX0-
23 US 23 US
24 SUS_S5# 24 PWR_OK
25 USB_SSRX1- 25 USB_SSTX1-
26 US 26 US
27 BATLOW# 27 WDT
28 (S)ATA_ACT# 28 HDA_SDIN2
29 HDA_SYNC 29 HDA_SDIN1
30 HDA_RST# 30 HDA_SDIN0
31 GND(FIXED) 31 GND(FIXED)
32 HDA_BITCLK 32 SPKR
33 HDA_SDOUT 33 I2C_CK
34 BIOS_DIS0# / ESPI_SAFS 34 I2C_DAT
35 THRMTRIP# 35 THRM#