ADLINK Technology MCM-100, User Manual

Page: 105 / 117

Functional Information 89
MCM-100/102
* Hot-plugging the USB dongle resets system. Be sure to plug the USB
cable then power up.
Table B-1: Internal I/O Legend
B.2.1 Internal HSUART Interface Wafer
HSUART signal and +3.3V power are provided by the connector
with cable.
Table B-2: HSUART Interface Wafer Pin Definitions
B.2.2 USIM Port
Use of 3G/4G mini-PCIe module requires a SIM card for communi-
cation with telecom operator. The MCM-100/102 provides a USIM
O
Internal I2C Interface Wafer (CN18)
P
Internal USB2.0 Interface Wafer (CN19)
Q
mSATA slot (CN5)
R
Internal HSUART Interface Wafer (CN22)
S
DDR3L SO-DIMM slot (CN1)
Pin Signal
1 +3.3V
2 SOC_UART1_RX_CON
3 SOC_UART1_TX_CON
4 SOC_UART1_CTS_CON-L
5 SOC_UART1_RTS_CON-L
6 GND
1