ADLINK Technology LEC-BTS Technical Reference Download

Page: 44 / 68

Utilities

Advanced > USB > USB Host Controller Configuration

Advanced Menu > SDIO

Figure 4-7: BIOS Setup Advanced Menu > SDIO

Table 4-24: Advanced Chipset USB Configuration

Feature

Options

Description

USB Client Support

• PCI mode

• Disabled

Enable/Disable USB OTG Support

XHCI Mode

• Enabled
•

Disabled

• Auto
• Smart Auto

Mode of operation of xHCI controller.

USB 2.0 (EHCI) Support

•

Enabled

• Disabled

Control the USB EHCI (USB 2.0) functions. One
EHCI controller must always be enabled.

USB EHCI debug

• Enabled

• Disabled

Enable/Disable PCH EHCI debug capability

USB Per Port Control

•

Enabled

• Disabled

Control each of the USB ports (0~2). Enable: Enable
USB per port; Disable: Use USB port x settings.

USB Port #0~2

•

Enabled

• Disabled

Enable/Disable USB port 0-2.

Summary of Contents for LEC-BTS





































































Search results

Summary of Contents for LEC-BTS

Reviews:

Related manuals for LEC-BTS

Brands by name

Popular brands

ADLINK Technology LEC-BTS, Technical Reference

Search results

Summary of Contents for LEC-BTS

Reviews:

Related manuals for LEC-BTS

Brands by name

Popular brands