Express-TL User’s Guide
PICMG COM.0 R3.0
Page 16
Copyright © 2022 ADLINK Technology, Inc.
2.9.
Debug
30-pin flat cable connector for use with DB-30 x86 debug module
Supports embedded controller access, SPI BIOS flashing, internal power rail test points, debug LEDs
2.10.
Power
Power Modes: AT and ATX mode (AT mode startup controlled by SEMA Board Controller)
Standard Voltage Input:
ATX: 12V±5% / 5Vsb ±5% or
AT: 12V±5%
Wide Voltage Input:
ATX: 8.5-20V, 5Vsb ±5%
or
AT: 8.5-20V
Power Management: ACPI 5.0 compliant, Smart Battery support
Power States: C1-C6, S0, S1, S3, S4, S5, S5 ECO mode (Wake-on-USB S3/S4, WoL S3/S4/S5)
ECO Mode support for deep S5 for 5Vsb power saving
Power Consumption
Please contact your ADLINK representative for the document “COM Express Module Power Consumption”.
2.11.
Mechanical and Environmental
Form Factor and specification
PICMG COM Express Rev 3.0 (COM.0 R3.0), Type 6, Basic size 125 x 95 mm
Operating Temperature
Standard
0°C to +60°C (Wide Voltage Input)
Storage: -20°C to +80°C
Extreme Rugged
-40°C to +85°C (Standard Voltage Input) Storage: -40°C to +85°C (selected SoC SKUs)
Humidity
5-90% RH operating, non-condensing, 5-95% RH storage (and operating with conformal coating)
