ADLINK Technology HDV62, User Manual

Page: 53 / 164

42 Function Library
4.4.3 Sensor Width
Purpose
This function gets image width of source input. The width is same
as the one of settings of SensorFormat.
Prototype

C/C++
int Hdv62_GetSensorWidth (UINT Number, UINT &Width)
 C#
int GetSensorWidth (uint Number, out uint Width)
 VB.Net
GetSensorWidth (ByVal Number as UInteger, ByRef
Width as UInteger) As Integer
Parameters
 Number
The number of device. The allowed value is from 0 to 15.
 Width
The image width of source input as illustrated in Figure 4-1.
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 for error information about return codes.
Figure 4-1: Signals of Frame Image