ADLINK Technology ETX-BT User Manual Download

Page: 50 / 70

9.2.6

System

Management

9.2.6.1 System Management > Board Information

Board Information

Info only

SEMA Firmware

Read only

Display SMC firmware.

Build Date

Read only

Display SMC firmware build date.

SEMA Boot loader

Read only

Display SMC boot loader.

Build Date

Read only

Display SMC boot loader build date.

Hardware Version

Read only

Display SMC hardware Version.

PCBA Revision

Read only

Display PCBA Revision

Serial Number

Read only

Display SMC serial Number.

Manufacturing Date

Read only

Display SMC manufacturing date.

Last Repair Date

Read only

Display SMC last repair date.

MAC ID

Read only

Display SMC MAC ID

SEMA Features:

Read only

Display SEMA features.

9.2.6.2 System Management > Temperatures and Fan Speed

Feature

Options

Description

Temperatures and Fan Speed

Info only

Board Temperatures

Info only

Current

Read

only

Display board current temperature.

Startup

Read

only

Display board startup temperature.

Min

Read only

Display board min temperature.

Max

Read only

Display board max temperature.

CPU Fan Speed

Read only

Display CPU fan speed.

System Fan Speed

Read only

Display system fan speed.

Summary of Contents for ETX-BT







































































Search results

Summary of Contents for ETX-BT

Reviews:

Related manuals for ETX-BT

Brands by name

Popular brands

ADLINK Technology ETX-BT, User Manual

Search results

Summary of Contents for ETX-BT

Reviews:

Related manuals for ETX-BT

Brands by name

Popular brands