ADLINK Technology EMX-100, User Manual, Page: 43 / 55

Controller IP Settings 33
EMX-100
1. Since the IP of each EMX-100 is the same at the begin-
ning (after reset), connect one device at a time to
change IP.
2. Connect the first device and select Device 0, enter the IP
(default value is 192.168.0.1), and select set device 0.
The Completed dialog appears and the Error indicator
lights, indicating that setting is complete.
3. Unplug the first device, connect the second device,
select device 1, enter the IP (default value is
192.168.0.2), and select set device 1.
4. After the Complete notice appears, after around 14 sec-
onds, the Error LED re-lights, indicating that Reset is
complete.
ġ