ADLINK Technology EGX-MXM-T1000, User Manual

Page: 27 / 33

System Requirements 17
EGX-MXM-T1000
2.4 Dual Mode DisplayPort Implementation
The EGX-MXM-T1000 supports four dual mode DisplayPorts by
default. HDMI is supported via dongle (see “Display Support and
Options” on page 3.). The system requires a switch circuit to
determine whether the AUX or DDC signal is output from the MXM
module, and AC coupling capacitors should be placed on the sys-
tem board.
Figure 2-4: Dual Mode DisplayPort Implementation
DisplayPort Connector
MXM Connector
3.3V
AUX_P/DDC_CLK
AUX_N/DDC_DAT
DP_x_Lx_P
DP_x_Lx_N
CONFIG1 (CABLE ADAPTOR DETECT)
Hot Plug Detect