ADLINK Technology DLAP-8000 Series, User Manual

Page: 45 / 103

Power Consumption 35
DLAP-8000
Appendix A Power Consumption
A.1 Power Consumption Reference
Power consumption as follows is based on lab data that includes
of two different power modes.
X
DC mode: 24V DC is applied and current is measured by
the DC power supply.
X
AC mode: 110V AC is applied and current is measured by
the AC power supply.
The power consumption (W) is calculated as the product of
applied voltage (V) and the current (A).
Platforms tested for this data have available external I/O interfaces
and are attached to supported devices such as VGA and DVI
monitors, CFast card, PS/2 keyboard/mouse, USB dummy load,
COM loopback, audio loopback, with an internal hard disk driver
installed, and without any PCIe card installed.
Information is presented for reference only. Actual power con-
sumption will vary with different attached devices and operating
system.
NOTE: NOTE:
Information in this Appendix is for power budget planning and
design purposes only. Actual power consumption may differ
based on final application.