ADLINK Technology DLAP-8000 Series, User Manual

Page: 31 / 103

System Layout 21
DLAP-8000
Refer to Section 4.1: Attach DC Power Connector on page 31 to
install the DC Power Connector to the DC Power Input.
Please use an approved power source as certified by IEC or UL.
The maximum ambient operating temperature (Tma) is described
in “Important Safety Instructions”. Altitude during operation is up to
2000 m where output meets LPS and SELV circuit requirements.
Power Source Rating
NOTE:
NOTE:
The backplane connector supports a backplane power supply
to provide PEG card power in a DC mode system. It can pro-
vide 24V and 20A for the backplane. It is recommended to use
the same power supply as the motherboard.
Voltage Current
DC Power Source 24V DC 34A
AC Input 100V to 240V 10.5A to 3.5A
WARNING:
Before providing DC power, ensure the voltage and polarity pro-
vided are compatible with the DC input. Improper input voltage
and/or polarity can be responsible for system damage.
AVERTISSEMENT: Avant de fournir une alimentation CC,
assurez-vous que la tension et la polarité fournies sont compati-
bles avec l'entrée CC. Une tension d'entrée et / ou une polarité
incorrectes peuvent être responsables de dommages au système.