manualshive.com logo in svg

ADLINK Technology DLAP-211-JNX Series, User Manual, Page: 37 / 47

Share
Download
ADLINK Technology DLAP-211-JNX Series User Manual Download Page 37

Using the System

 27

DLAP-211-JNX / DLAP-211-JT2 / DLAP-211-Nano Series

3

Using the System

3.1

Software Configuration

The DLAP-211 ships with a customized NVIDIA Linux for Tegra
(L4T) image pre-installed. The latest version of this custom L4T
image and other relevant files are available on the ADLINK web-
site.

DLAP-211-JNX:

https://www.adlinktech.com/Products/Deep_Learning_Accelerator
_Platform_and_Server/Inference_Platform/DLAP-211-JNX

DLAP-211-JT2:

https://www.adlinktech.com/Products/Deep_Learning_Accelerator
_Platform_and_Server/Inference_Platform/DLAP-211-JT2

DLAP-211-Nano:

https://www.adlinktech.com/Products/Deep_Learning_Accelerator
_Platform_and_Server/Inference_Platform/DLAP-211-Nano

3.2

System Recovery

You will need a Linux host PC (Ubuntu is recommended) in order
to flash your client device with a new system image. Complete the
following steps on the client before performing the host PC steps.

Client:

1. Connect the OTG cable to the USB 2.0 port.

2. Press the reset and recovery buttons at the same time.

3. Press the power switch.

4. Release the reset button.

5. Release the recovery button.

Summary of Contents for DLAP-211-JNX Series
















































Reviews:

No comments